‘Becofil’ Candle Demisters

'Becofil' Candle Demisters, commonly referred to as Candle Filters - are intended primarily for the removal of very fine mist particles of less than 2 microns. A combination of impingement for removing greater than 1-2 microns and diffusion for finer particles where Brownian motion becomes increasingly predominant.

Each filter is composed of millions of fibres, and although the efficiency of each individual fiber is low, the cumulative effect is very high. Low approach velocities are necessary in order not to mask the diffusion velocities associated with Brownian movement. Candle filters are installed vertically and gases pass horizontally through the filter wall, the trapped particles coalescing and draining through the filter bed.

The continuing development of 'Becofil' Candle Demisters coupled with the experience gained from hundreds of applications worldwide, enables Begg Cousland to offer a range of filters to conform to the varying requirements of industry in terms of capacity, pressure loss and mist removal efficiency.

'Becofil' Candle Demisters will help to eliminate visible stack plumes, meet today’s more stringent air pollution regulations and recover more lost products from processes. It will also help to remove pollutants, which may cause corrosion further downstream resulting in costly premature replacement of equipment and maintenance down time.



Choose another Product
select another product Agitators Ceramic Filters Coalescers / Knitted Wire / Mesh Pad Coalescers / Liquid-Liquid Demisters/Knitted Wire/ Mesh Pad Gas Scrubbers / Absorbtion Columns Hot Gas Filtration & Dry Scrubbing Rotary Brush Scrubber Rotary Table Vacuum Filter Sulphuric Acid Distributor Tower Linings - Corrosion Resistant Tower Packings / Random Packings / Tower Internals Turnkey Filtration Systems Turnkey Solvent Recovery Systems,Turnkey Solvent Recovery Systems Vane Packs / Chevrons / Droplet Seperators